Lava Computer Lava Port 650 Manuel d'utilisateur

LavaPort 650Installation ManualRev. B01LAVA COMPUTERSSSERIAL PCIP.N. MOKO L74.1MADEINCANADAPNMOKO S-1MADEIN JAPAN0255351

10Setting LavaPort Data Rates in Windows

11The data rate of the LavaPort may be set using the Bits per Second pulldown menu.Please note that this menu will also appear when setting the“PortPr

The LavaPort-650 supports data rates up to 460.8 kbps, including 115.2kbps and 230.4 kbps. However, not all modems support Com Port ratesabove 115.2 k

13

14Setting LavaPort FIFO Control in Windows

The LavaPort-650 uses a 16650 UART incorporating a 32-byte FIFO (first-in first-out) buffer.The FIFO control tabs set the buffer “trigger” levels.When

Flow Control refers to the type of signaling that is used between themodem and the LavaPort.If you are connecting the LavaPort to a modem or ISDN term

17Windows NT 4.0 InstallationWindows NT Driver Installation1. Once the LavaPort-650 is installed in your PC, turn your computer onand start NT.2. Plac

18Please note that Com 1 may not appear in this applet if you have yourmouse attached to Com 1.The LavaPort-650 supports data rates up to 460.8 kbps,

19This pageintentionally blank

ContentsQuick InstallInstalling the LavaPort-650 HardwareWindows Installation· Changing I/O Resources - Com & IRQ· Setting LavaPort Data Rates· La

Lava Computer MFG Inc.LavaTechnical Support9:00 am to 5:30 pm Monday to Friday (Eastern Time)Tel: +416 674-5942Fax: + 416 674-8262E-mail: tech@laval

Quick InstallWindows 95/98/ME/2000/XP1. With the power off, insert the LavaPort-650 PCI card into any free PCIslot.2. Launch Windows - new hardware wi

Hardware Installation41. Before opening the casing of your computer, make sure that allpower is off.2. Locate an unused PCI slot and insert the LavaPo

Windows Driver Installation1. Once the LavaPort-650 is installed in your PC, start your computer.Windows will automatically detect the LavaPort-650 as

63. Click on the Start button, then choose Settings, Control Panel,System, Device Manager.You should see a window that is similar tothe following:

4. Click on Ports and select the Com port listed under the headingLavaPort 650 PCI.5. Click Properties.The following screen will appear:7

8Because the LavaPort 650 is a PCI device,Windows will always allocatenon-standard I/O resources to this port (e.g. Assigning it as Com 5, eventhough

91. You may physically modify the I/O Range and IRQ used by theLavaPort 650 by de-selecting the “Use Automatic Settings”checkbox, and double-clicking