Lava-computer 2SP-PCI Manuel d'utilisateur télécharger pdf (Page 4)

Connecting a non-printer device

(e.g. external drive or parallel scanner)

to the 2SP-PCI's parallel port

In Windows 95/98/ME (not Windows 2000/XP) some parallel port

devices require parallel ports that use standard (legacy) ISA LPT

addresses (0278h or 0378h). Because the 2SP-PCI card is a fully

compliant PCI device, its default address (Input/Output Range) is

beyond the standard range of ISA I/O addresses. In order to connect

such a peripheral to the 2SP-PCI card, the I/O address range of the card

must therefore be changed manually.This section describes how this is

done.

1. Open Control Panel|System|Device Manager and find the Parallel-

PCI listing under Ports. Click Properties, and proceed to the

Resources tab.The following screen will appear (Note: the

Input/Output Range and Interrupt of your particular configuration

may differ from the one below).

1 2 3 4 5 6 7 8

Pas de commentaire

Lava-computer 2SP-PCI Manuel d'utilisateur Page 4